The Aero 300 filler cap has become the first choice with designers and engineers who have made it the standard in many branches of motor sport as well as other fields of activity. A wide range of accessories allows the cap to be installed in many locations. Custom flanges can be offered in low volumes for this product.
Installation
A flat and smooth surface should be chosen to successfully install the Aero Filler Cap. Where the filler cap is not in contact with fuel, for example when fitted to the outside skin of a vehicle, it is possible to accommodate a slightly curved surface but care must be taken not to distort the flange by over tightening the fixing screws.
With ‘wet’ installations such as motorcycle and boat tanks, the use of a gasket and sealant is recommended. We recommend ‘Hylomar’ sealant or a suitable equivalent.
Specification
Fixing Arrangement: 6 x M05 Countersunk Screws
Applications: Fuel, Oil & Water Tanks
Compatibilities: Extreme Fuels, Operation Temperature -40°C to +80°C
Supplied With:
Centre Cap
6 Hole Flange M05 Screw Pack (CSK Screws, Washers, Nyloc Nuts)
NBR Cork Gasket
Materials:
Centre Cap: Aluminium Alloy 6082/T6 Forging
O-Ring: Viton A (FPM or FKM)
Saddle: Acetal POM Kepital F20-03
Lever & Centre Pin: Stainless Steel 303/304
Washer & Nyloc Nut: Stainless Steel A2 Type
Gasket: Neoprene NBR bonded Cork
Dimensions:
Outside Diameter A: 94.0mm
Centre Cap Diameter B: 34.0mm (Adjustable)
Bolt Circle Diameter C: 76.2mm
Depth D: 32.0mm
Spigot: 62.4 (Ø63.0 Cut-Out)
Neck Diameter: N/A Flange
Thickness: 3.25mm
